Wall Mounting Enclosures
ECOR-Fe Mild Steel Enclosures
Wall-mounting
Metallic
Mild Steel powder-coated
Non-Corrosive
CRN Mild Steel Enclosures
Enclosure made from sheet steel 1.5mm.
Base made from a continuous length of sheet steel, with front gutter profile, and rear wall welded to the body.
Concealed easily removable hinges allowing 120° opening and reversibility of door.
Welded studs on body and door for earth continuity
Reversible door from sheet steel 1.5mm to 2mm, with 2 reinforcing profiles for doors from 500x400mm.
3 mm double bar lock.
Continuous foamed-in polyurethane gasket ensuring lifetime IP66 sealing.
Large cable entry plate with polyurethane gasket.
Wall-mounting
Metallic
Mild Steel powder-coated
Non-Corrosive
S3D Mild Steel Enclosures
Enclosure for high-end applications and/or where aesthetics are important.
Made from sheet steel 1.5mm.
Base made from 1 piece sheet in cross-construction and welded corners.
Double-folded edges of the base lip and door edges for strength and enhanced sealing to IP66.
Large cable gland entry plate.
Sealing by continuous polyurethane foam gasket.
Beveled door edges for robustness and aesthetics.
Reversible door from sheet steel 1.5mm to 2mm, with 2 or 4 reinforcing profiles.
Window version with 4mm toughened safety glass.
3-point locking system for heights 600mm and up.
3 mm double bar lock.
Wall-mounting
Metallic
Mild Steel powder-coated
Non-Corrosive
ST-EE ATEX Mild Steel Enclosures
ETA wall-mounting enclosures ST…EE and ECOR…EEX comply with the European Directive 2014/34/UE that aims to ensure the free circulation of the products concerned in EU countries, and applies to equipment and protective systems to be used in potentially explosive atmospheres (ATEX), for the presence of flammable gases, vapours, mists or dusts.
According to the reference standards EN60079-0; 7 and 60079-31 boxes are “electric enclosures” classified for category II and zones 1, 2, 21, 22 for gas and dust (GD) with protection method EX-e, EX-tb. Protection methods are based on the concept of prevention. To comply with this, the directive establishes high structural standards and restrictive features of equipment and components, and strict periodic testing of the approved products under UNI EN13980 and ISO 9001.
Wall-mounting
Metallic
Mild Steel powder-coated
Non-Corrosive
SDV Mild Steel Industrial Boxes
Enclosure and lid made from 1.2mm sheet steel.
Enclosure provided with holes for fixing optional hinges.
Lid with continuous polyurethane gasket, and fixed with captive screws.
Wall-mounting
Metallic
Mild Steel powder-coated
Non-Corrosive
SBM Mild Steel Industrial Boxes
Internal drilled profiles for installing mounting plates and DIN rails.
Closure by 4 or 6 half-turn thread screws.
M6 x 16 earth studs welded in the cover and body.
Mounting direct through the enclosure or by wall-mount brackets.
Wall-mounting
Metallic
Mild Steel powder-coated
Non-Corrosive
CR 19″ Mild Steel Rack Enclosures
ETA CR Steel Wall-mount 19” Rack Enclosures
Mild steel 19” rack enclosures covering a range from 6 to 21 U.
Available in 2 depths 450mm or 550mm with a large cable entry.
Aesthetics achieved by tempered glass window and locking cover with eye-catching design.
Wall-mounting
Metallic
Mild Steel powder-coated
Non-Corrosive
