Products – Elen Enclosures https://www.elen.co.za Electrical enclosures Distributors Tue, 05 Oct 2021 14:32:23 +0000 en-US hourly 1 https://wordpress.org/?v=6.2.2 https://www.elen.co.za/wp-content/uploads/2021/05/ELEN_logo_new_spaceman_right-100x100.png Products – Elen Enclosures https://www.elen.co.za 32 32 Fandis TRT Thermostats https://www.elen.co.za/product/fandis-trt-thermostats/ Tue, 05 Oct 2021 13:05:29 +0000 https://www.elen.co.za/?post_type=product&p=1915 Thermostats Single thermostats are used to control the temperature in an electrical enclosure, by operating a cooling or heating unit or signal device. Available with Normally Open (NO), Normally Closed (NC), or change-over contact. Normally Open: typically used to switch on a fan when internal temperature rises above the setpoint. Normally Closed: typically used to switch off a heater when internal temperature rises above the setpoint. Twin thermostats are used where multiple drives are required. Integrates two independently operable devices into one compact assembly for simultaneously controlling heating, cooling or signaling devices via two knobs. Setpoint adjustable from -10 oC - +80 oC Mounting by a patented DIN rail clip-on system. Screw terminal connection.   Hygrostats Hygrostats detect the level of humidity in the air inside the enclosure and operate the cooling or heating units when relative humidity exceeds the setpoint, to prevent condensation. Setpoint adjustable from 0% - 90% RH Mounting by a patented DIN rail clip-on system. Screw terminal connection.]]> NO / NC Thermostat Voltage Rated Current A Max Current A Setting Range TRT-10A230V-NC 110-250 Vac; 60 Vdc 10 15 -10… +80 °C TRT-10A230V-NO 110-250 Vac; 60 Vdc 10 15 -10+80 °C
Dual Thermostat
TRT2-10A230V-NCNC 110-250 Vac; 60 Vdc 10 15 -10… +80 °C
TRT2-10A230V-NCNO 110-250 Vac; 60 Vdc 10 15 -10… +80 °C
TRT2-10A230V-NONO 110-250 Vac; 60 Vdc 10 15 -10… +80 °C
Change-over Thermostat
TRT-230V-S01 230 Vac Heat 10 / Cool 5 10 +5… +60 °C
Hygrostat
IGR35F 120-240 Vac 5-Oct +10… +90 °C
]]> ClimaSys SMART Ventilation System CSVS https://www.elen.co.za/product/climasys-smart-ventilation-system-csvs/ Tue, 21 Sep 2021 12:42:45 +0000 https://www.elen.co.za/?post_type=product&p=1054
  • Inefficient fan operation, moving less air and consuming more energy.
  • Accumulated dust affecting internal moving parts, and conductivity across circuits.
  • Increased internal temperature reducing lifespan of electrical/electronic components.
  • Safety risks due to overheated surfaces.
  • Failure of equipment causing potentially huge costs due to downtime.
    •   CSVS is a digitized, scalable thermal network that gives you real-time monitoring of all critical ventilation functions, across all your control panels.   The ClimaSys Filterstat Controller collects information from filter and fan sensors and intelligent algorithms analyze data inputs to keep you informed about the thermal status of every enclosure: Detect general poor health of enclosure:
    • Input/output temperature
    Detect fan issues:
    • Air temperature passing through the filter, for inlet and outlet.
    • Current level, consumed energy
    • Fan RPM measurement
    • Used and remaining (approximate) lifespan
    Detect grid filter issues:
    • Air flow temperature
    • Dust level (0% clean – 100% dirty)
    • Number of replacements
    • Remaining time before next replacement
    The Filterstat Controller can be connected to up to eight Thermal Hub devices to support a network of 256 sensors. Controller and Hub available in voltages 90-230Vac and 30 Vdc.   Each Smart Fan and Smart Grid includes a Smart Filter with Fan Sensor and integrated Dust Sensor with patented infrared technology, that feeds data to the Filterstat Controller.   Each Smart Fan and Smart Grid includes high-visibility multi-colour LED indicators:
    • Green: the system is working well.
    • Orange: filters need to be replaced soon.
    • Red: filters need to be replaced.
    • Purple: the fan has reached end of life / failed.
    • Blue: “ping” function to locate a selected enclosure.
      CSVS can be implemented on existing brownfields ventilation installations by means of a retrofit kit.   Characteristics Smart fans comprise an axial motor in a protective housing on the front, rear surfaces, and a Smart filter with Dust sensor and a Fan sensor with infrared technology. The external grid displays the ventilation status through multi-coloured LED indicator of the Dust sensor. The Smart Filter can be replaced during operation without risk of contact with the rotating element. Material of external grids: Thermoplastic ASA Polycarbonate, self-extinguishing according to UL 94 V-0. Colour: RAL9005 Black Conditions of use: external temperature must not exceed 30°C and must be at least 5°C lower than the temperature required in the enclosure. Available in: 230Vac, 115Vac, 24Vdc, 48Vdc.   Protection Rating Ingress protection: IP54 according to IEC 60529 Mechanical protection: IK08 according to IEC 62262   Accessories Modular Frame for panel-mounting of controller and hub. Communication cables in lengths 0.5, 1, 1.5, 2, 3, 4 and 5m. Kit with clips and stickers for retrofit of CSVS system on existing ventilation systems. Spare Smart Filter mats G2 and G3.  ]]>     Filterstat Controller Voltage CCOFST90250V 90-250Vac Filterstat controller AC, with 4 ports CCOFST30V 30V ac/dc Filterstat controller DC, with 4 ports
    Thermal Hub Voltage
    CCOFSEM8U2 90-250Vac Thermal Hub for networking, with 8 ports
    CCOFSEM8U1 30V ac/dc Thermal Hub for networking, with 8 ports
    Modular Frame
    CCOFR55 Panel-mount installation Frame for Controller and Hub
    Free Flowrate (50Hz) Flowrate 1 Outlet Grille Flowrate 2 Outlet Grille Voltage Dimensions Cutout SMART Fan SMART Grid
    34 21 29 230V 137 x 117 x 49 92×92 CVF38M230DG CAG92DG
    34 23 35 115V 137 x 117 x 49 92×92 CVF38M115DG CAG92DG
    74 52 60 230V 170 x 150 x 62 125×125 CVF85M230DG CAG125DG
    68 54 62 115V 170 x 150 x 62 125×125 CVF85M115DG CAG125DG
    142 130 138 230V 268 x 248 x 104 223×223 CVF165M230DG CAG223DG
    151 130 138 115V 268 x 248 x 104 223×223 CVF165M115DG CAG223DG
    259 209 218 230V 268 x 248 x 116 223×223 CVF300M230DG CAG223DG
    259 209 218 115V 268 x 248 x 116 223×223 CVF300M115DG CAG223DG
    502 412 420 230V 336 x 316 x 162 291×291 CVF560M230DG CAG291DG
    522 425 434 115V 336 x 316 x 162 291×291 CVF560M115DG CAG291DG
    638 500 528 230V 336 x 316 x 162 291×291 CVF850M230DG CAG291DG
    783 643 654 115V 336 x 316 x 162 291×291 CVF850M115DG CAG291DG
    731 598 609 400V 336 x 316 x 162 291×291 CVF850M400DG CAG291DG
    Communication Cable Length m
    CCA50MFST 0.5 Filterstat communications cable, black 500mm
    CCA100MFST 1 Filterstat communications cable, black 1000mm
    CCA150MFST 1.5 Filterstat communications cable, black 1500mm
    CCA200MFST 2 Filterstat communications cable, black 2000mm
    CCA300MFST 3 Filterstat communications cable, black 3000mm
    CCA400MFST 4 Filterstat communications cable, black 4000mm
    CCA500MFST 5 Filterstat communications cable, black 5000mm

    Brownfields Retrofit Installations

    Brownfields Kit Cut-out Cable
    CCFSBRKIT92 92 x 92 0.5 2 External Smokey Grids, 2 Smart filters, 1 Filterstat Controller, 3 cables,1 fan sensor, 10 stickers and retainer flaps mini-tool kit
    CCFSBRKIT125 125 x 125 1
    CCFSBRKIT223 223 x 223 1.5
    CCFSBRKIT291 291 x 291 2
    Brownfields Smart Grids Cut-out
    CAG92DGC 92 x 92 External grid equipped with G2 filter and Dust Sensor to be installed in an existing grid support.
    CAG125DGC 125 x 125
    CAG223DGC 223 x 223
    CAG291DGC 291 x 291
    Brownfields Smokey Grids Cut-out
    CAG92BPC 92 x 92 External grids to be installed in an existing grid support or used as spare part. Smart filter and Dust sensor to be ordered separately.
    CAG125BPC 125 x 125
    CAG223BPC 223 x 223
    CAG291BPC 291 x 291
    Sensors & Toolkit
    CCAFSDUST Individual Dust Sensor to fit any existing ClimaSys CV fan or CA grid
    CCARPM Individual Fan RPM Sensor to fit any existing ClimaSys CV fan
    CCABLK Toolkit / clips for converting brownfields fans to CSVS
    ]]>         Fandis FC Limit switches https://www.elen.co.za/product/fandis-fc-limit-switches/ Fri, 17 Sep 2021 06:32:26 +0000 https://www.elen.co.za/?post_type=product&p=1006 Limit Switch Type Voltage Rated Current A FC-001 Plain plunger 24-400 Vac; 24-250 Vdc 6-0,4 A (dc); 10-4 A (ac) FC-002 Plain plunger manual reset 24-400 Vac; 24-250 Vdc 6-0,4 A (dc); 10-4 A (ac) FC-003 Roller plunger 24-400 Vac; 24-250 Vdc 6-0,4 A (dc); 10-4 A (ac) FC-004 Roller plunger adjustable 24-400 Vac; 24-250 Vdc 6-0,4 A (dc); 10-4 A (ac) FC-005 Plain plunger 3 NC contacts 24-400 Vac; 24-250 Vdc 6-0,4 A (dc); 10-4 A (ac) ]]> Schneider Door Switches & Accessories https://www.elen.co.za/product/schneider-door-switches-accessories/ Fri, 17 Sep 2021 06:15:35 +0000 https://www.elen.co.za/?post_type=product&p=1000 Door Switches Switch unit equipped with support and fixings for direct fixing to the enclosure. Used to control lighting, air-conditioning units, etc. Not compatible with installed 19" swing rack or internal door. Normally Closed or Normally Open contact, 10 A/500 V. Versions for ranges S3D, CRN, Spacial SF and Spacial SM.   Metal Document Pocket For cabinet systems Spacial Sf and SM. Direct mounting on the reinforcement frame of the door. Adjustable mounting with a pitch of 25 mm. Material: Steel Painting: Structured finish, epoxy polyester powder-coating Colour: RAL 7035 Light Grey   Plastic Document Pocket Attachment by adhesive tape for all enclosure ranges. Material: Polystyrene Colour: RAL 7035 Light Grey (NSYDPA4: RAL9001 Cream)]]> Door Switch Enclosure Range Current A Voltage INLCRN CRN, S3D and PLM 10 …500 Vac DCM20 Spacial SF 10 …500 Vac MDCM20 Spacial SM 10 …500 Vac
    Doument Pockets Document Size Material Dimensions
    DPA5 A5 ABS 174x188x22
    DPA4 A4 ABS 230x247x23
    DPA44 A4 ABS 230x247x40
    DPA3 A3 ABS 285x476x35
    SDP6M 600mm Spacial SF /SM Steel 262×600
    SDP8M 800mm Spacial SF /SM Steel 262×800
    ]]>         Junction Box Assembly https://www.elen.co.za/product/junction-box-assembly/ Tue, 25 May 2021 14:57:13 +0000 https://www.elen.co.za/?post_type=product&p=201 PROGRESS Stainless Steel Glands https://www.elen.co.za/product/progress-stainless-steel-glands/ Tue, 25 May 2021 14:55:53 +0000 https://www.elen.co.za/?post_type=product&p=200
  • Guaranteed seal
    • Inner contours matched to the sealing insert ensure a targeted compression of the insert and guarantee tightness and compliance with protection class IP68 up to 10 bar.
    • Material: CrNi stainless steel A2 (DIN EN 1.4305 / AISI 303)
    • Seal: TPE
    • O-ring: NBR
    • Temperature range: -40°C / +100°C
    • Protection class: IP68 (up to 10 bar)
    ]]>     Size Gland LONG Entry Clamping Range OD mm Thread mm Lock Nut M8x1.25 1100.08.94.035 2.5 – 3.5 6 8008.96 M8x1.25 1100.08.94.050 3.5 – 5 8 8008.96 M10x1.5 1100.10.94.060 4 – 6 10 801.96 M12x1.5 1100.12.94.065 5 – 6.5 12 8012.96 M12x1.5 1100.12.94.080 6.5 – 8 15 8012.96 M16x1.5 1100.17.94.105 8 – 10.5 15 8017.96 M20x1.5 1100.20.94.150 11 – 15 15 8020.96 M25x1.5 1100.25.94.205 16 – 20.5 15 8025.96 M32x1.5 1100.32.94.255 21 – 25.5 15 8032.96 M40x1.5 1100.40.94.330 28.5 – 33 15 8040.96 M50x1.5 1100.50.94.420 37 – 42 15 8050.96 M63x1.5 1100.63.94.520 46 – 52 15 8063.96 Minimum order pack quantities may apply ]]>     PROGRESS Nickel-plated Brass Glands https://www.elen.co.za/product/progress-nickel-plated-brass-glands/ Tue, 25 May 2021 14:55:15 +0000 https://www.elen.co.za/?post_type=product&p=199
  • Short or long thread
  • Visible safety
    • A small bulge in the sealing insert confirms the correct tightening torque.
    • High distortion protection
    Integrated retaining grooves in the lower part and sealing insert prevent twisting.
    • Guaranteed seal
    Inner contours matched to the sealing insert ensure a targeted compression of the insert and guarantee tightness and compliance with protection class IP68 up to 10 bar.
    • Material: Nickel-plated brass
    • Seal: TPE
    • O-ring: NBR
    • Temperature range: -40°C / +100°C
    • Protection class: IP68 (up to 10 bar)
    ]]>     Size Gland LONG Entry Clamping Range OD mm Thread mm Lock Nut M6x1.0 1160.06.025 2 – 2.5 8 8000.06 M6x1.0 1160.06.030 2.5 – 3 8 8000.06 M8x1.25 1160.08.040 3 – 4 10 8000.08 M10x1.5 1160.10.060 4 – 6 10 8000.1 M12x1.5 1160.12.065 5 – 6.5 10 8000.12 M12x1.5 1160.12.075 6.5 – 7.5 10 8000.12 M16x1.5 1160.17.105 8 – 10.5 10 8000.17 M20x1.5 1160.20.145 11 – 14.5 10 8000.17 M25x1.5 1160.25.190 16 – 19 11 8000.20 M32x1.5 1160.32.255 21 – 25.5 13 8000.20 M40x1.5 1160.40.330 28.5 – 33 13 8000.25 M50x1.5 1160.50.420 37 – 42 14 8000.25 M63x1.5 1160.63.520 46 – 52 14 8000.32 M75x1.5 1160.75.630 56 – 63 15 8000.40 ]]>     SYNTEC Polyamide Cable Glands https://www.elen.co.za/product/syntec-polyamide-cable-glands/ Tue, 25 May 2021 14:54:25 +0000 https://www.elen.co.za/?post_type=product&p=198 SYNTEC® Synthetic Cable glands - with innovative lamellar technology
    • Short or long thread - for differing enclosure wall thicknesses.
    • Audible reliability - an audible “click” guarantees vibration- and shake-proof hold.
    • Guaranteed tightness - highly durable elastic sealing rings guarantee sealing to IP68.
    • Innovative lamellar technology
    AGRO-developed lamellar geometry with movable articulated lamellae, providing large clamping and sealing area, support varying diameters ensuring outstanding strain relief and distortion protection.  Pre-fixing of the synthetic lock nut allows for overhead installation.
    • Material: Polyamide PA 6
    • Properties: halogen-free
    • Sealing ring: TPE
    • Temperature range: -30°C / +100°C
    • Protection class: IP68
    ]]>     Size Gland SHORT Entry Clamping Range OD mm Thread mm Lock Nut M12x1.5 1555.12.06 2.5 – 6.5 6 8212 M16x1.5 1555.17.06 2 – 6 8 8216 M16x1.5 1555.17.10 5 – 10 8 8216 M20x1.5 1555.20.08 3.5 – 8 9 8220 M20x1.5 1555.20.13 7 – 13 9 8220 M25x1.5 1555.25.11 5 – 11 10 8225 M25x1.5 1555.25.17 10 – 17 10 8225 M32x1.5 1555.32.25 17 – 25 10 8232

     

    Size Gland LONG Entry Clamping Range OD mm Thread mm Lock Nut
    M12x1.5 1555.12.1.06 2.5 – 6.5 12 8212
    M16x1.5 1555.17.1.06 2 – 6 15 8216
    M16x1.5 1555.17.1.10 5 – 10 15 8216
    M20x1.5 1555.20.1.08 3.5 – 8 15 8220
    M20x1.5 1555.20.1.13 7 – 13 15 8220
    M25x1.5 1555.25.1.11 5 – 11 15 8225
    M25x1.5 1555.25.1.17 10 – 17 15 8225
    M32x1.5 1555.32.1.25 17 – 25 15 8232
    M40x1.5 1555.40.1.33 22 – 33 15 8240
    M50x1.5 1555.50.1.38 28 – 38 15 8250
    M63x1.5 1555.63.1.44 32 – 44 16 8263
    ]]>         Orangis Thermal Control https://www.elen.co.za/product/orangis-thermal-control/ Tue, 25 May 2021 14:54:01 +0000 https://www.elen.co.za/?post_type=product&p=197 Thermostats Single thermostats are used to control the temperature in an electrical enclosure, by operating a cooling or heating unit or signal device. Available with Normally Open (NO), Normally Closed (NC), or change-over contact. Normally Open: typically used to switch on a fan when internal temperature rises above the setpoint. Normally Closed: typically used to switch off a heater when internal temperature rises above the setpoint. Twin thermostats are used where multiple drives are required. Integrates two independently operable devices into one compact assembly for simultaneously controlling heating, cooling or signaling devices via two knobs. Setpoint adjustable from -10 oC - +80 oC Mounting by a patented DIN rail clip-on system. Screw terminal connection.   Hygrostats Hygrostats detect the level of humidity in the air inside the enclosure and operate the cooling or heating units when relative humidity exceeds the setpoint, to prevent condensation. Setpoint adjustable from 0% - 90% RH Mounting by a patented DIN rail clip-on system. Screw terminal connection.  ]]> Thermostats Single thermostats are used to control the temperature in an electrical enclosure, by operating a cooling or heating unit or signal device. Available with Normally Open (NO), Normally Closed (NC), or change-over contact. Normally Open: typically used to switch on a fan when internal temperature rises above the setpoint. Normally Closed: typically used to switch off a heater when internal temperature rises above the setpoint. Twin thermostats are used where multiple drives are required. Integrates two independently operable devices into one compact assembly for simultaneously controlling heating, cooling or signaling devices via two knobs. Setpoint adjustable from -10 oC - +80 oC Mounting by a patented DIN rail clip-on system. Screw terminal connection.   Hygrostats Hygrostats detect the level of humidity in the air inside the enclosure and operate the cooling or heating units when relative humidity exceeds the setpoint, to prevent condensation. Setpoint adjustable from 0% - 90% RH Mounting by a patented DIN rail clip-on system. Screw terminal connection.  ]]> Lumeis Enclosure Lamps https://www.elen.co.za/product/lumeis-enclosure-lamps/ Tue, 25 May 2021 14:53:39 +0000 https://www.elen.co.za/?post_type=product&p=196   Characteristics Material: Casing in PC/ABS and diffuser in transparent polycarbonate. Appliance Class: Class II Power supply: 1.8m Cable Protection: IP20 Storage temperature: -10°C to +70°C Operating temperature: -0°C to +50°C Lifetime at 40°C: 20,000h Lumen Flux: 416 lm LED Output: 7W Ballast: Electronic incorporated Switch: ON/OFF Approvals: CE]]>   Characteristics Material: Casing in PC/ABS and diffuser in transparent polycarbonate. Appliance Class: Class II Power supply: 1.8m Cable Protection: IP20 Storage temperature: -10°C to +70°C Operating temperature: -0°C to +50°C Lifetime at 40°C: 20,000h Lumen Flux: 416 lm LED Output: 7W Ballast: Electronic incorporated Switch: ON/OFF Approvals: CE]]>